-40%
12 x SPIM08HP 3.7V 8AH pouch lithium ion cells +12 holders +24 screws (1 cycle)
12 x SPIM08HP 3.7V 8AH pouch lithium ion cells +12 holders +24 screws (1 cycle)
12 x SPIM08HP 3.7V 8AH pouch lithium ion cells +12 holders +24 screws (1 cycle)
12 x SPIM08HP 3.7V 8AH pouch lithium ion cells +12 holders +24 screws (1 cycle)
12 x SPIM08HP 3.7V 8AH pouch lithium ion cells +12 holders +24 screws (1 cycle)
12 x SPIM08HP 3.7V 8AH pouch lithium ion cells +12 holders +24 screws (1 cycle)
12 x SPIM08HP 3.7V 8AH pouch lithium ion cells +12 holders +24 screws (1 cycle)

12 x SPIM08HP 3.7V 8AH pouch lithium ion cells +12 holders +24 screws (1 cycle)

$ 39.6

  • Amp Hours: 8 Ah
  • Application: High Drain Devices, Solar/Wind Devices
  • Battery Size: 3.7V
  • Brand: SPIM08HP
  • Bundle Description: Holder, busbars and screws
  • Chemical Composition: Lithium
  • Custom Bundle: Yes
  • Seller Notes: “tested - full capacity”
  • Type: Li-ion
  • Voltage: 3.7 V

Description

6 x 2 cells 3.7V 8ah connected in parallel configuration 1s2p that's 3.7V 96ah total (or 6 in series for 25.2V 16ah) in 6 double cell holders with 24 screws for easy connection to busbar. 3 of them in series 12,6V can start a car. Free 2 cooper + 2 nickel busbar for parallel or series(u need to cut busbars) setup - with BMS connection terminal Its overstock from last EV conversion project.- heavy-duty cells Date of production - second part of 2021 You can do continuous discharge each with 200A (400A from 2 pack) - that's 25C!!! Max charging current 120A - 15C They coming from backup emergency system - according to seller - haven't taken 1 full cycle. Balanced and calibrated to 4,10V to 4.15V If You are looking for a custom pack - 12V, 24V, 36V, 48V, 60V, 72V or more = please contact me or check my other auctions. Lithium ion battery for DIY enthusiasts.(anything U think about like power wall or e-scooter ) Material: li-ion. Typical capacity: 8Ah.(96ah with this 6 x 2 pack deal) Nominal voltage: 3.7v. Weight of single cell around: 300g - 810g (1,8 lbs) for 2pack in holder Dimensions of cell body: 9x138x190mm. Dimensions of cell with tabs: 9x138x210mm. Internal resistance: ≤0.8mΩ. Max charge rate: 120A. Recommend continuous discharge rate: 200A. Pulse discharge rate(3 seconds): 400a. Fully charged voltage: 4.2v. Discharge cut off voltage: 2.5v. Cycle life: 2000 cycles to 80% capacity at 100% dod under normal temperature. Applications: e-bikes, power walls, car audio, golf carts, forklifts, ups, solar system, etc. Advantages: safety, environment-friendly, high discharge current, low capacity loss, super-long cycle life.