-40%
12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue
12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue
12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue
12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue
12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue
12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue
12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue
12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue

12V 48AH 4s6p SPIM08HP 3.7V 8AH 700WH+ lithium ion pack 300A discharge continue

$ 92.4

  • Amp Hours: 48AH
  • Application: High Drain Devices, Solar/Wind Devices
  • Battery Size: 12 V
  • Brand: SPIM08HP
  • Bundle Description: Terminals + Holders and screws
  • Chemical Composition: Lithium
  • Country/Region of Manufacture: United States
  • Custom Bundle: Yes
  • Seller Notes: “few cycles”
  • Type: Li-ion
  • Voltage: 3.7 V

Description

Please chose available shape of side busbars from last picture. 12V 48AH 4s6p SPIM08HP lithium ion cells pack 700WH+ (0,7KWH+) fully charged, but U can drain them with 5kWH for short time Please check Your specification - fully charged pack - 16,8V - empty pack 10V Thick copper terminals with stud(1 or 3) connectors. Upgraded steel rods (1/4" instead of 3/8")for better compression + heavy duty stop nuts and flashers. Separate screw terminals with stop nuts for BMS connection Its overstock from last EV conversion project.- heavy-duty cells You can do continuous discharge this pack safety with 300A (1200A max from manufacture specifications from 6 in parallel but thicker busbars needed) If U will use only 50A - 300A, they will last much more then 2000 cycles Continuous charge 300A - (720A max from manufacture specifications from 6 in parallel but thicker busbars needed) They are coming from the freezer backup emergency system - according to the seller - haven't taken 1 full cycle. Balanced and calibrated to 4,15V to 4.20V per cell - 16,8V per pack If You are looking for a custom pack - 12V, 24V, 36V, 48V, 60V, 72V, or more - please contact me or check my other auctions. if U need more, I do offer packs with thicker copper terminals Single Lithium ion cell specification for DIY enthusiasts(anything U think about like RV, power wall, or e-scooter ) Material: li-ion. Typical capacity: 8Ah (48ah with this 4s6p pack deal) Nominal voltage: 3.7v. (10V - 16V with this 4s6p pack deal Weight of single cell around: 300g - 810g (1,8 lbs) for 2pack in holder - 24 lbs for whole pack Dimensions of cell body: 9x138x190mm. Dimensions of cell with tabs: 9x138x210mm.Dimensions of whole pack 10,25 x 9 5/8 x 5 5/8 without side terminals 14,25 with side terminals Internal resistance: ≤0.8mΩ. Max charge rate: 120A. (x 6 with 6p configuration = 720A with upgraded heavy duty busbars - not included Recommend continuous discharge rate: 200A (x 6 with 6p configuration = 1200A with upgraded heavy duty busbars - not included Pulse discharge rate(3 seconds): 400a.(x 6 with 6p configuration = 2400A with upgraded heavy duty busbars - not included Fully charged voltage: 4.2v. Discharge cut off voltage: 2.5v. Cycle life: 2000 cycles to 80% capacity at 100% dod under normal temperature. Applications: RV, e-bikes, power walls, car audio, golf carts, forklifts, ups, solar system, etc. Advantages: safety, environment-friendly, high discharge current, low capacity loss, super-long cycle life. Custom battery pack are dedicated to individual customer specifications. Please be very careful with initial plug in. Seller is not responsible for incorrect setup.