Description

1S 3.7V Cell Lipo Lithium Li-ion Battery Micro USB Charger Module Charging DIY DESCRIPTION Disclaimer: This product has been powered on and tested to for ensure normal function, but there is a small probability of USB soldering. If there is such a fault, please repair it yourself Features *The charge cycle is automatically terminated when the charge current drops to 100mA after the final float voltage. *When the battery voltage drops below 4.05V (roughly corresponding to 80% to 90% of the battery capacity), the charging cycle starts over. *When the battery voltage is lower than 2.9V, the battery will be precharged with a current of 100mA. *Product size: 12.5×15.5×3.5mm (excluding the 1mm protruding -USB socket) Basic parameters Input voltage range: 5~6V Output voltage: 4.2V Charging current: 1A Product size: 12.5×15.5×3.5mm (excluding the 1mm protruding from the -USB socket) Packing list: 1*Module POLICES Shipping Payment WARRANTY We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the c ombined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7 -15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection . If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message. We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, p lease feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours. On Dec 12, 2024 at 04:56:47 PST, seller added the following information: